Scanners

Firmware · 2018-08

Uniden SDS100 firmware 1.05.01 main / 1.01.05 sub (public beta)

Verified — manufacturer file

Download zip (2.1 MB) Manufacturer's page ↗

Main firmware 1.05.01 with sub 1.01.05 as posted in Uniden's "Firmware 1.05.01M Public Beta" thread (August 2018). Uniden's change log lists 1.05.01 main / 1.01.05 sub as a public release dated 12 August 2018; whether this .bin is byte-identical to the Sentinel-delivered release could not be confirmed.

Read before installing. BETA - superseded. Posted by Uniden (forum user UPMan) in a RadioReference open-beta thread; kept for the record. A scanner should run the current public release via Sentinel.
Product
SDS100 firmware
Version
1.05.01 main / 1.01.05 sub (public beta)
Released
2018-08
Runs on
Any PC that can copy files to a USB mass-storage device
Applies to
Uniden SDS100
Zip SHA-256
39e8d42e849c7b20686ba6fde1e53d9b4f831dd7517dd74fa7af481512a727c1

Contents

FileSizeSHA-256
SDS-100_V1_05_01M_V1_01_05S.zip2.1 MB7699fcd2b7bed712c6ae541d22ed773677ae1784789228d8f9ea9220535b2e9a
README.txtThese instructions
SHA256SUMSChecksums of the files above

Instructions

The complete README.txt included in the zip:

Uniden SDS100 firmware 1.05.01 main / 1.01.05 sub (public beta)
===============================================================

WHAT THIS IS
Main firmware 1.05.01 with sub 1.01.05 as posted in Uniden's "Firmware
1.05.01M Public Beta" thread (August 2018). Uniden's change log lists 1.05.01
main / 1.01.05 sub as a public release dated 12 August 2018; whether this .bin
is byte-identical to the Sentinel-delivered release could not be confirmed.

IMPORTANT: BETA - superseded. Posted by Uniden (forum user UPMan) in a
RadioReference open-beta thread; kept for the record. A scanner should run the
current public release via Sentinel.

This is BETA firmware from 2018-2019. Uniden hosted it in the "PartnerWeb"
area of its support wiki and announced it in RadioReference open-beta threads.
It is superseded and is kept for the record only.

APPLIES TO
The Uniden SDS100 (US model) only. Not for the SDS100E/SDS200E, SDS150,
BCD436HP or BCD536HP.

BEFORE STARTING
  - A Windows PC and the scanner's USB cable (SDS100: mini-USB port on the
    side; SDS200: mini-USB port on the front).
  - A backup of the whole microSD card and of the Favorites Lists (Sentinel).
  - SDS100: a charged battery. SDS200: the power supply connected.

CONTENTS OF THIS ZIP
The download zip holds the vendor file exactly as Uniden published it, plus
this README.txt and SHA256SUMS.

  SDS-100_V1_05_01M_V1_01_05S.zip  (2218023 bytes)
    SHA-256 7699fcd2b7bed712c6ae541d22ed773677ae1784789228d8f9ea9220535b2e9a

  Inside SDS-100_V1_05_01M_V1_01_05S.zip:
    SDS-100_V1_05_01.bin
      main (CPU) firmware 1.05.01, public-beta package
      2162688 bytes
      SHA-256 2ac4f3dc0cbf85ca7958c70b56feb239347e962680203b9954391d0682134144
    SDS-100-SUB_V1_01_05.firm
      sub-processor firmware 1.01.05
      80240 bytes
      SHA-256 e7b0a6313850b6b6ff105a24b10779e3b37bc2b654f5356bdbd3a0d8a6fbe3f2

INSTALLATION
Uniden's beta posts gave only brief steps ("copy the appropriate file ... to
the firmware folder of your scanner and reboot"); the fuller steps below
follow Uniden's later manual-install readmes for the same scanners.

  1. Connect the scanner and choose Mass Storage (press E at "Select USB
     mode").
  2. Open the removable disk, then BCDx36HP -> firmware. Leave the two .dat
     files alone.
  3. Copy SDS-100_V1_05_01.bin and SDS-100-SUB_V1_01_05.firm into the
     "firmware" folder.
  4. Restart the scanner; it applies the update while booting. Do not
     interrupt it.

VERIFYING
Menu -> Settings -> See Scanner Information -> Firmware Version.

IF SOMETHING GOES WRONG
  - Beta firmware was issued for testing and carries no support. Return to a
    public release with Sentinel -> UPDATE -> Update Firmware.
  - If the scanner will not start properly after files were removed from the
    "firmware" folder, Sentinel -> Clear User Data rebuilds the card (erasing
    user data).

DOWNGRADING
Moving back to an older public build by hand uses the same copy-and-restart
method with that build's files. Sentinel always installs the newest release.

PROVENANCE
  - Official source:
    https://info.uniden.com/twiki/pub/PartnerWeb/SDS100-Beta/SDS-100_V1_05_01M_V1_01_05S.zip
  - Announced in:
    https://forums.radioreference.com/threads/firmware-1-05-01m-public-beta.375723/
  - Wayback copy:
    https://web.archive.org/web/20240816010744/http://info.uniden.com/twiki/pub/PartnerWeb/SDS100-Beta/SDS-100_V1_05_01M_V1_01_05S.zip
  - Retrieved: 2026-09-18. Status: verified (Uniden's own server; SHA-1
    matches the Wayback capture).

MORE INFORMATION
  - scanners.fubsypoly.com, Uniden SDS100 - Vol 5, Upgrades & Firmware:
    https://scanners.fubsypoly.com/uniden-sds100/vol-5/
  - Reference Library, Easier to Read SDS100/SDS200 Manual:
    https://scanners.fubsypoly.com/library/easier-to-read-sds100-200-manual/
  - Uniden change log:
    https://info.uniden.com/twiki/bin/view/UnidenMan4/SDS100FirmwareUpdate

Other versions of SDS100 firmware

← All Uniden SDS100 downloads