Manual / Guide
Whistler TRX-2 — Quick Start Guide
- scanner
- whistler
- trx-2
- quick start
Manual / Guide
DESKTOP/MOBILE RADIO SCANNER Quick Start Guide INSTALL BRACKET INSTALL ANTENNA 1. Align the slots. 2. Rotate connector. TRX-2 START HERE! Package Contents: For desktop use: 1. Attach the five protective rubber feet to the mounting bracket. 2. Slide the scanner into the bracket, aligning the scanner’s side holes with the holes in the bracket, and then screw the mounting knobs into the scanner. Antenna Scanner AC Adapter Mounting Bracket STEP-BY-STEP PROGRAMMING USB Cable Also Included: • • • • • • • • • • • Refer to your User Guide for bracket mounting and vehicle installation. Machine Screw (4) Self Tapping Screw (2) Lock Washer (2) Rubber Washer (2) Rubber Feet (5) Knob (2) Remote Head Mounting Bracket LAN Cable for Remote Head DC Cable with Fuse SD Card (Installed in Scanner) User Guide See the User Guide for complete instructions AC Power 1. Connect the supplied adapter to the scanner’s DC 13.8V jack. 2. Plug the adapter into a standard household power socket. 3. To disconnect, unplug the adapter from the power source first. 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. Press the button for one second. Use the / / / to set the date and time. Press SEL to save. Select Browse Library. Select country. Select first letter of State/Province. Select State/Province. Select Counties/Cites. Select first letter of County. Select County. Select Data Type NOTE: Police/Fire and Emergency services will be in “Categories” for smaller towns, “Systems” for larger ones. 11. Select desired agency, category or system available for the county. 12. Select desired subcategory. Investigate listings by pressing to go deeper into that selection. When the cursor switches from the right side of the screen to the left, you are at the bottom of a category. NOTE: When selecting a System, check at least one of the “Sites” in range, then go further into Categories to find objects. 13. Use the SEL button to check boxes for services you wish to monitor. Press SEL to un-check a selected service and at anytime press to go back. Once all desired objects have been checked, press MENU. 14. Select Import Selected. 15. Select desired Scanlist location for selected objects and press to save. 16. Press SEL to continue to main menu. 17. Select Scanlists from main menu. Use the / / / to rename the scanlist if desired. Confirm box beside desired scanlist is checked. 18. Repeat steps to add additional scanlists, or select Scan from the Main Menu to begin scanning. NOTE: When traveling or for quick programming, refer to location based, ZIP code programming, of the User Guide. P/N 581009b 05D16 © The Whistler Group, Inc.