Utility
Uniden BC_VUP firmware updater 2.0.0.7
Verified — manufacturer file
Download zip (4.5 MB) Manufacturer's page ↗
Uniden's BC_VUP 2 firmware updater (installer dated December 2008), the version Uniden linked beside the BCD396XT 1.07.00/1.08.14 and BC246T 2.60.00 firmware files. It writes a user-selected .scn firmware file to the scanner.
Read before installing. Needed only for the offline .scn route (older BCD396XT firmware, or if BC_VUP 3 cannot reach Uniden's server). Release date not published; installer files are dated 2008-12-02.
Contents
| File | Size | SHA-256 |
|---|---|---|
| BC_VUP_v2.0.0.7.zip | 4.5 MB | abecc8df845b4583f900e8348d5af0134dcebfd3f540ca773e248aecf58ca4ce |
| README.txt | These instructions | |
| SHA256SUMS | Checksums of the files above | |
Instructions
The complete README.txt included in the zip:
Uniden BC_VUP firmware updater 2.0.0.7
======================================
WHAT THIS IS
------------
Uniden's BC_VUP 2 firmware updater (installer dated December 2008), the
version Uniden linked beside the BCD396XT 1.07.00/1.08.14 and BC246T 2.60.00
firmware files. It writes a user-selected .scn firmware file to the scanner.
The zip holds a single self-extracting installer, BC_VUP_v2.0.0.7.exe. BC_VUP
2 installs into a "BCSS" directory and, when run, asks for a firmware .scn
file that the user has downloaded separately.
Uniden did not publish a change list for 2.0.0.7 against 2.0.0.3.
APPLIES TO
----------
BC_VUP 2 is model-independent; the .scn file determines the model. Uniden
paired 2.0.0.7 with BCD396XT firmware 1.07.00 and 1.08.14 and BC246T firmware
2.60.00.
Not for the BC350A or BC355N (no PC interface, no updatable firmware).
BEFORE STARTING
---------------
- A Windows PC. Supported Windows versions were not stated by Uniden.
- The firmware .scn file for the scanner (for example BCD396XT_V1_08_14.scn
or BC-246T_V2_60.scn, both in this archive).
- A serial connection: Uniden's USB-1 cable with its PL2303 driver, or a PC
RS-232 port. Note the COM port.
- The scanner's AC adapter and a backup of its programming.
- Delete the install files of any earlier BC_VUP (in the "BCSS" directory).
CONTENTS OF THIS ZIP
--------------------
The zip published on fubsypoly.com wraps the vendor file(s) byte-for-byte,
unmodified.
BC_VUP_v2.0.0.7.zip
4,693,065 bytes
SHA-256 abecc8df845b4583f900e8348d5af0134dcebfd3f540ca773e248aecf58ca4ce
The vendor zip contains:
BC_VUP_v2.0.0.7.exe (4,696,915 bytes, dated 2008-12-02)
README.txt
This file.
SHA256SUMS
SHA-256 checksums of the files above.
INSTALLATION
------------
Uniden's procedure (BCD396XT firmware page, 2009):
1. Unzip BC_VUP_v2.0.0.7.zip and the firmware zip to the desktop.
2. Run BC_VUP_v2.0.0.7.exe to install the firmware updater.
3. Run the installed BC_VUP application and follow the on-screen
instructions. No registration key is needed.
4. When prompted, select the .scn firmware file.
5. When prompted, turn the scanner off, remove the batteries, and hold L/O
and 6 while plugging in the AC adapter; the backlight comes on and stays
on until the update ends.
VERIFYING
---------
Check the firmware version on the scanner. BCD396XT: MENU > Settings > See
Scanner Info > Firmware Version. BC246T: MENU > See Scanner Info > Firmware
Version.
IF SOMETHING GOES WRONG
-----------------------
- Wrong COM port or a COM-port conflict causes almost every error.
- Repeat the whole procedure, including the L/O + 6 power-up, after any
error or interruption; the scanner recovers only when an update completes.
- Uniden supports only its USB-1 adapter.
DOWNGRADING
-----------
Uniden does not document downgrading with BC_VUP 2. Whether it will write an
older .scn over newer firmware could not be confirmed.
PROVENANCE
----------
File: BC_VUP_v2.0.0.7.zip
Source: https://info.uniden.com/twiki/pub/UnidenMan4/BC246TFirmwareUpdate/BC_VUP_v2.0.0.7.zip
Wayback: https://web.archive.org/web/20210506161652/http://info.uniden.com/twiki/pub/UnidenMan4/BC246TFirmwareUpdate/BC_VUP_v2.0.0.7.zip
Retrieved: 2026-09-18
Vendor page: https://info.uniden.com/twiki/bin/view/UnidenMan4/BC246TFirmwareUpdate
Status: verified
Downloaded from Uniden's live file. The same file was attached to Uniden's
BCD396XT firmware page in 2009 (4583.1 K in Uniden's attachment table,
matching this file's size). Status verified.
MORE INFORMATION
----------------
- BCD396XT Upgrades & Firmware:
https://scanners.fubsypoly.com/uniden-bcd396xt/vol-5/
- BCD396XT firmware page:
https://info.uniden.com/twiki/bin/view/UnidenMan4/BCD396XTFirmwareUpdate
- BC246T firmware page:
https://info.uniden.com/twiki/bin/view/UnidenMan4/BC246TFirmwareUpdate